Washing / Drying Equipment
Industrial Washer Model AWM 235
This 2-zone industrial washing machine is suitable for the continuous cleaning and washing of plastic boxes and trays. The machine is solid and built in stainless steel AISI304. The cover of the machine is easy to open. Easy cleaning of the filter.
Optional: mesh belt for the cleaning of buckets, saucepans, ...
Wash Treatments
Infeed: Stainless steel infeed zone with water recuperation.
Washing zone: Sustained jetting with warm water and soap, re-circulated from a heated wash tank. Water injection through nozzles type Pro-max, mounted on stainless tubes. Permanent water filtration through horizontal filter situated just above the water tank.
Rinsing zone: Sustained jetting with hot, fresh water provided by the customer (standard) with water recuperation to the washing zone, this to refresh and heat up the washing water. Rinsing system through nozzles type Pro-max, mounted on stainless tubes.
Outfeed: Stainless steel outfeed zone with water recuperation.
Capacity based on crates with dimensions 400x600x200 mm | 200 to 250 crates per hour |
Water tank capacity | 200 liter |
Water consumption rinsing zone | Approx. 200 liter an hour |
Washing water temperature | 50 to 55 °C |
Electrical power supply | 3 x 400 Volt - 50 Hz + N + PE |
Internal safety circuit | 24 VAC |
Total power consumption | 18 kW |
>> Heating washing zone | >> 12 kW |
>> Water circulation pump | >> 5,5 kW |
>> Conveying system in machine | >> 0,5 kW |
>> Heating rinsing | >> Optional |
Water tank inlet connection | ¾ " |
Rinsing water tube connection | ¾ " |
Water tanks outlet connection | 2 " |
Max. tunnel passage | Width 400 mm x Height 300 mm |
O'all dimensions washer | L3650xW950xH1350 mm |
Internal transportation system | - Stainless press bar to hold crates in position during transport |
- Motor-reductor, IP55 |